Features
● For the power of synchronous change signal amplification
● High power of each output
● High-speed process data, no delay, no flicker
● Acceptable PWM control
● DC12-24V wide voltage input
● 3 Channel RGB control, 10A per channel
● Applicable any LED module
TECHNICAL PARAMETERS
INPUT VOLTAGE: DC 12-24V
SIGNAL OUTPUT: RGB
MAX LOAD CURRENT 10A 3 CHANNEL
OUTPUT POWER 360W max (12v) 720W max 24v
SAFETY WARNINGS
In order to ensure the integrity of the state and use of safe, please follow the instructions on
this manual and remind
1. Please don’t install this dimmer in lightening, intense magnetic and high-voltage fields.
2. To reduce the risk of component damage and fire caused by short circuit, make sure
correct connection
3. Always be sure to mount this unit in an area that will allow proper ventilation to ensure a
fitting temperature.
4. Check if the voltage and power adapter suit the dimmer
5. Don’t connect cables with power on, make sure a correct connection and no short circuit
checked with instrument before power on.
6. Please don’t open dimmer cover and operate if problems occur.
Leave a Comment